放射科设备 |
超声科设备 |
手术室设备 |
检验科设备 |
实验室设备 |
理疗科设备 |
急救室设备 |
儿科设备 |
眼科设备 |
牙科设备 |
妇科男科设备 |
灭菌消毒设备 |
医用教学模型 |
美容仪器设备 |
家庭保健器具 |
CR病床 推车 柜 |
ABS病床轮椅 |
医用耗材 |
新闻中心
松下开发出可变形成轮椅的床型机器人
Time:2012-2-6 10:34:04 Author:admin
松下电器日前开发出了可从床变形成轮椅的机器人“Robotic Bed”。从床形状态首先上半部分立起,分离为轮椅。由此,在减轻护理人员的负担的同时,还可扩大被护理者的活动范围。
被护理者要生活自理,安全放心、舒适的移动是必不可少的。但要从卧床状态转移至移动器具上时,必须护理人员的帮助,而且转移时还有跌落的危险。因此,该公司开发了同时具有床和轮椅功能的机器人。使用者可自已操作,在保持安全舒适的姿态下,变形成床或轮椅,因此不仅可减轻转移时的负担,而且还减少了对跌落的担心。
该机器人配备了安全操纵床或轮椅的控制技术。比如,随着从床变为轮椅或者从轮椅变为床,机器人可自动进行部件的分离或组合。在轮椅状态下行驶时,可躲避人和障碍物以确保安全。
为在不熟悉机器人操作时也能够使用而改进了接口。可通过对话型接口完成从床到轮椅的变形。轮椅采用可直观使用的控制器。可方便实行轮椅和床组合的指示以及轮椅的行驶。
垫子的形状可随床或轮椅各自的使用形态而变化。在作为床使用时,利用该功能帮助使用者翻身,防止床的偏移。此外还配备了能够与网络家电联动和确认安全摄像头的信息接口“Robotic Canopy”。该显示器部分可相应于姿态而改变位置,当轮椅从机器人分离出去时会弹起。
松下电器参与了日本新能源产业技术综合开发机构(NEDO)的“生活支援机器人实用化项目”,计划通过研究、开发该机器人,为制定机器人安全规格等提供协助。另外,该公司还预定在2009年9月29日~10月1日举行的“第36届国际福利机器展”(东京国际展览中心)上展出此机器人。